1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 208Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 208

Sealants and Lubricants Required OMC Triple-Guard Grease OMC Gasket Sealing Compound OMC Adhesive TM OMC Moly Lube OMC Nut
starting of engine while servicing, f1l 2Coat the propeller shaft splines sparingly with OMC TripleGuard grease3Place the
thrust bushing in the propeller and then slide the assembly onto the propeller shaft4Install the thrust washer on splines
of the propeller shaft5Install and tighten the propeller nut to torque of 120 in.lbs(14 Nm)Install new cotter pin or continue