1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 218Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 218

Propeller Shaft Bearing Housing Servicing Inspect the bearings in placeIf bearing is removed for any reason, it must be replaced1To
of the bearing facing the toolInstall the bearing until the tool contacts the housingr::;;1 r::;;;l 3Install new seals back
to back in the rear of the 15500 bearing housing using OMCSeallnstalier PIN 910585 or 326556Apply OMC Gasket Sealing Compound
to the metal casing of the seals before installing Install the inner seal with lip facing toward the bearing housing and
install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after