1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 225Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 225

1221 20Install shift cradle on shift shaft with part number facing straight upUse OMC Needle Bearing Assembly Grease to keep
lever screwApply OMC Nut Lock to threads of the screw 1241 24Move the shift rod to align hole in the shift lever with hole
in gearcaseInstall and tighten the screw to torque of 48-80 in Ibs(5-9 Nm)':;;1 25Push the shift housing in positionApply
OMC Gasket Sealing Compound to threads of the retaining screwsInstall and tighten the screws to torque of 60-84 inIbs(7-9
Nm) 26Using OMC Needle Bearing Assembly grease, place the reverse gear thrust bearing on shoulder of the reverse gearInstall