1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 227Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 227

32Fill the gearcase with 16.4 floz(485 ml) lubricant as followsThe gearcase must be in an upright position Remove the oil
has been performed33Adjust the shift rod as follows: f31l1321Checkusing OMC Universal Shift surface of theGauge from the
shift rod hole to gearcase Rod Height PI 389997 with the shift rod in the NEUTRAL posit ionRotate the shift rod full turns
up or down, as necessary, to obtain the correct adjustmentCheck the shift rod height with the rod offset to the frontShift
Rod Heights 161511 in 1132 in(430,3 0,8 mm) 21 15 16 in 1132 in(557,3 0,8 mm) 247 16 in 1 32 in(620,8 0,8 mm) Standard Shaft