1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 241Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 241

COA3590 1491 9Align hole in the clutch dog with slot in the propeller shaft Install the clutch dog on the shaft with grooved
shaft assembly into the gearcase as far as possible, being sure to align the shift housing pin with hole in forward end of
gearcase housing 1521 13Lubricate new shift rod cover a-ring with OMC TripeGuard greaseInstall the a-ring into the shift
rod coverGrease the threaded end of the shift rod and insert it through the cover bushingTurn the shift rod while pushing
it through the bushing to avoid damaging the a-ring 1531 14Apply OMC Gasket Sealing Compound to both sides of a new shift
cover gasket Position the gasket on the gearcaseThread the shift rod into the shifter detent about four turns 15Move shift
rod from side-to-side while pushing on the propeller shaft to ensure proper alignment of the bearing housing locator pin