1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 251Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 251

L!J install outer seal retaining 1ol 13To assemble inner and outer seals to bearing housing, ring into its groove in the
inner lip facing outwardTap using than the outside diameter of the sealWhen the seal is seated, install the inner retaining
ring G2l 16Remove the seal carrier assembly and spacer from the driveshaft 17Remove the retaining ring with retaining ring
pliersWear safety glasses and proceed with care to avoid unsnapping the ring from the pliers 18Inspect driveshaft bearing
in placeIf that bearing is removed for any reason, it must be discardedTo remove, press bearing off driveshaft from impeller