1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 258Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 258

f61 rJ'l 9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24
1Move remote control handle to NEUTRAL detent Hold reverse gate up and check for proper clearance between reverse gate and
water flow passage: 016 in(23,9 mm) 1!1 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while holding
reverse gate up, until proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle to
FORWARD detent 5When the roller is in FORWARD positionapply hand pressure to move the reverse gate up, toward NEUTRALIf properly