1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 275Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 275

Starter Circuit CheckTEL, TTL i ing with this check Avoid accidental starting while testing; disconnect the starter cable
voltmeter between and groundTurn key switch ON Connect voltmeter between and ground IIIf meter shows 12V, go to Step IIIf
meter reads OV, go to Step II If meter shows 12V, replace start button andor wire If meter shows OV, go to Step II and voltage
between Check ground If meter shows 12V, go to Key Switch Checkthis sectionCheck wire to terminal strip If meter shows OV,
go to Step EI and voltage between Check groundB and voltage between Check ground Connect voltmeter between and ground If
meter shows 12V, replace fuse, holder, or wire to key switch If meter shows OV, replace wire from solenoid terminal to fuse
0 Disconnect black ground wires from Connect voltmeter between solenoid terminal and groundTurn key switch ON Push start
switch If meter shows 12V, repairreplace black wire between and ground If meter shows OV, disconnect all leads from solenoid,