1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 283Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 283

Solenoid Check All engine wiring must be disconnected from the solenoid before proceeding with this test'21l 1Calibrate ohmmeter
Neoprene Dip No Load Current Draw, Electric Starter Securely fasten starter in vise or other suitable fixture before proceeding
with this check1Locate battery rated 350 cold cranking amps or higher that is in good condition and fully charged 1221 2Connect
0-50 amp ammeter in series with heavy jumper between the battery "+" terminal and he starter "+" terminal3Attach or hold
vibration tachometer, such as Frahm Reed tachometer, to the starter 1221 4Complete the circuit with heavy jumper between