1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 311Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 311

Power Supply Troubleshooting Before beginning this procedure: Charge battery and connect battery cables Turn key switch OFF,
voltage at terminal strip, check wire If voltage at Vlgo to Step 5 [!] 5Push UP trim buttonCheck for voltage at V2 (bluewhite):
If no voltage, check trim switch's redpurple wire If voltage, go to Step 66Reinstall UP relayPush blades only halfway into
bracket in UP (blue) end of bracketDR3950 rv f21 7Check for voltage at V3 on relay blade (M terminal of relay): If no voltage,
go to Relay Ohmmeter Test If voltage, go to Step 88Disconnect trim motor's blue and green power wire connector (leave relay