1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 313Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 313

Relay Ohmmeter Tests bracket will vary from model to model, but the relay terminals are always connected to the electrical
an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect meter leads to relay terminals "B-"
and "M" The meter must show continuityDR3950 ] 3Connect meter leads to relay terminals "B+" and "M" The meter must show no
continuityf41 4Calibrate ohmmeter on appropriate scale and connect the leads to the two relay "S" terminalsTo avoid immediate
meter damage, never apply an ohmmeter to an electrical circuit where voltage is present The meter must show 70-100 ohmsDR3950