1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 37Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 37

Synchronization and Linkage Adjustments INote It is important that this step-by-step procedure be followed in sequence and
No.1 spark plug contacts hole and turn in center portion Lock the tool in place with its ringII 5While holding the piston
firmly against the tool, mark the timing wheel directly across from the pointerConsider this mark A"6Continue to turn the
crankshaft in clockwise direction until piston contact is felt againMark this exact spot on the timing wheel and consider
this mark "B"Remove the piston stop tool7Use the molded-in marks to find the midpoint between marks "A" and "B"Mark the midpoint
on the rim of the timing wheelConsider this mark "C"If mark "C" and the cast-in TDC line are in agreement, timing pointer
alignment is correctIf not, proceed to Step 8 8Turn the crankshaft clockwise to align the mark "C" with the pointerHold the