1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 43Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 43

Remote Control Cable InstallationEngine To prevent accidental starting of engine, verify that battery cables are disconnected
is down in the RUN position4While rotating the propeller shaft, move the remote control handle from NEUTRAL to the FORWARD
detent and then halfway back to NEUTRALThis positions the control for proper throttle cable adjustment INote Failure to follow
this procedure exactly might cause accelerated wear of shift system components and high shifting effort rn 5.is Remove stop
timing sensor coverBe sure the timer base the lever against on the flywheel coverW fA7Pull lightly on throttle cable to remove
backlash and install trunnion nut in anchor pocket8Temporarily install cable retainer9Check cable adjustment; if throttle
cable adjustment is too loose, idle speed might be high and inconsistentIf throttle cable adjustment is too tight, control