1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 57Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 57

Increase water level until "X" dimension is 25 in(630 mm)Water must begin to run through valve before reaching 25 in(630
pressure stabilizes, the pressure gauge must not indicate less than PSI (21 kPa) when held level with VRO hose fitting If
pressure is less than PSI (21 kPa), test pulse hose and crankcase fittingRefer to VRO Component Servicing, this section If
pulse hose and crankcase fitting are good and pressure pumpis less than PSI (21 kPa), replace In-Line Fuel Filter Servicing
Replace the filter element every 100 operating hours or once each season, whichever comes first[] 1Loosen the fuel filter
nut and remove the element2Clean all parts of the filter assembly with mild aerosol solvent and blow dryDo not dry parts
with cloth as lint might stick to the parts and clog the passagesDissolve any gummy deposits with OMC Cleaning Solvent Vacuum
Switch ServicingV6 Function Test 1All electrical connections should be complete and the engine's battery must be connectedE