1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 62Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 62

Component Servicing Anytime the VRO oil supply line has been disconnected from the engine, you must run 50: fueloil mixture
pickup assembly and from engine oil inlet fitting Use low pressure air to purge hose of oil Use cap holder, PIN 329661to
plug pickup end of hose Attach vacuum tester to the engine end of oil line and draw inHg vacuumThe oil system is good if
it can maintain inHg vacuum for at least five minutes Before installing pickup assembly, check pickup height1.8 gallon pickup6.9
0.06 in(174 1,5 mm) 3.0 gallon pickup8.8 0.06 in(224 1,5 mm) Pump For function tests of the System, this sectionpump, refer
to Testing Fuel To verify oil consumption and proper fuelloil ratios: COB5657A ill pellers; twist and remove all spark plug
leadsThen, install 2Start the engine and allow it to reach normal operating temperatureStop the engine 1Avoid accidental