1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 66Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 66

Assembly When assembling the fuel piston, always install new washer and stem in addition to other new parts requiredBe sure
onto stem with clockwise rotationPush poppet valve in (toward the stem) to hold the screw in place while turningTighten 14
turn past point of contact[] Position outer lip offuel piston in its groove in the intermediate housing Align oil piston
with oil pump bore and install inlet housingInstall Torx screws and tighten 18 turn past point of contactPosition outer lip