1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 82Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 82

26 DR3584 26 4Inspect float needle and seat for wear or distortionReplace both pieces if damage is noted5Inspect throttle
and needle hole for contaminationAssembly 1If removed, install the fuel manifold in the throttle body and secure with three
clamps and screws2Install slow speed spring and needleThread needle in until it bottoms and then back out three turns 3Install
calibration pocket gasket and cover, and torque screws to 10-15 inIbs(1,1-1,7 Nm) 4Install intermediate air bleed orifice
in main body and tighten securely5Install side cover with new gasket and torque screws to 24-30 in Ibs(3-4 Nm)6Install new