1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 84Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 84

140 4Install the primer hose to the intake manifold5Install the hose to the balance tube [!!] 6Install and secure the main
the needle adjustment 2Start the engine and allow it to reach normal operating temperatureRun the engine in FORWARD gear
at the specified idle speed for three minutes: If the adjustment is too lean, the engine will sneeze and backfire, go to
Step Ifthe adjustment is too rich, the engine will be rough and unsteady, go to Step 4 1421 3If the adjustment is too lean,
notice your reference mark and turn the needle V8 revolution counterclockwiseWaiting 15 seconds after each adjustment, repeat
th is procedure until you reach the highest consistent RPMand turn the needle 18 revolution clockwiseWaiting 15 seconds after
each adjustment, repeat this procedure until you reach the highest consistent RPM 421 4If the adjustment is too rich, notice