1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 87Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 87

5Assemble leaf valve shim (if required) and leaf stopInstall two screws near center of leaf stopDo not tighten GQl 6Hold
leaf valve 9After leaf valve is positioned properly, install remaining screwsTighten all screws evenly to torque of 25-35
inIbs(3-4 Nm)Installation r:J31 1Install seal onto the intake manifoldDo not use sealer on the seal1141 2Remove old adhesive
from threads of the leaf plate retaining screwsPrime the threads with OMC Locquic Primer and let dryApply OMC Nut Lock to
threadsPosition the leaf plate assembly and install the screwsTighten the screws to torque of 25-35 inIbs(3-4 Nm) 3Position