1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 99Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 99

Flywheel Servicing INote In order to produce the voltage necessary to run an ignition system, the flywheel magnets must be
to Running Test, Alternator Output, Section 7Removal 1To avoid accidental starting of engine, twist and remove all spark
leads2Remove the timing sensor cover and rectifierregulator coverDisconnect the timing sensor plug3Rotate crankshaft clockwise
to about 30 ATDC []] 4Install OMC Piston Stop, PIN 384887, in No.1 spark plug holeTurn stop in until it contacts the piston,
and lock in place with ring 6Remove the pointer from the cover and timing wheel from the crankshaft7Remove the 17 screws