1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 105Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 105

Ignition Coils and Power Pack Servicing Removal 1Remove the rectifierregulator cover and ignition coverDisconnect the timing
shield from the power pack 1Position the power pack and bottom ignition coilPosition the lock washerflat washerand power
pack ground lead on the bottom port ignition coil screwInstall screw finger tight2Place lock washer and flat washer on bottom
starboard ignition coil screw and install the screwTighten both ignition coil screws to 50-95 inIbs(5,6-10,7 Nm)3Connect
the primary leads and spark plug leads to the bottom ignition coil4Repeat Steps and for the remaining ignition coils[] 5Carefully