1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 122Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 122

STEPPOWER COIL TEST Ground Test 1Disconnect the starboard side Packard connector between stator and power pack2Attach test
stator lead 3Crank engine and observe meterIf meter shows 50 volts or higher, proceed to next step indicated in Troubleshooting
Sequence Chart, Page 3-24 If meter shows less than 50 volts, check condition of wiring and connectors If wiring and connector
condition is good, go to Ohmmeter TestOhmmeter Test INote All ohmmeter tests must be performed with engine NOT running 1Calibrate
ohmmeter on appropriate scale rn 2Connect meter between orange and orangeblack stator leads: Meter must show 55 10 ohms 3To
test for grounded condition, connect ohmmeter black lead to clean engine groundAlternately connect ohmmeter red lead between