1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 147Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 147

[]] 7Lubricate new lower housing a-ring with OMC TripleGuard grease and place the a-ring on the lower housing []] 8Lubricate
to notice that the connecting rods have top and bottom diagonal oil hole will always face the flywheel rn 11 Apply OMC Needle
Bearing Greasepin the 28 Align the to wrist pin borebearingsInstall the bearings in the wrist bearings in the bore using
OMC Wrist Pin Bearing Tool, PIN 336660 12Place the two wrist pin thrust washers on the tool with flat side of the washers
facing out13Support the piston in OMC Piston Cradle, PIN 326572, with bottom wrist pin hole facing downOil the wrist pin