1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 150Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 150

1231124131Secure restraining jaw "e" and forcing jaw "D" to frame 32Tighten the rod cap screws to torque of 25-30 inIbs(2-3
the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter 1 The above procedure must be
followed to assure frame is Note squarely in position 34Tighten the forcing screw to torque of 23 in Ibs(2,5 Nm) 35Loosen
both rod cap screws 1f4 turn 36Apply preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws 37Apply final torque
of 30-32 ftIbs(40-43 Nm) in two alternate increments to both rod cap screws38Loosen forcing screw and remove the frameRepeat