1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 151Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 151

31 24454 24453 40Apply OMC Locquic Primer to the mating flange of the crankcase and let air dry41Apply OMC Gel-Seal" sealant
of the tube cannot be determinedUsing old OMC Gel-Seal I sealant could cause crankcase air leaks42Thoroughly clean upper
seal area ofthe crankshaftPlace new upper seal on crankshaftDo not apply sealer to outside diameter of the seal 43Lower the
crankcase into place 1341 1351 1361 44Install the main bearing screws finger tightTwo shorter screws on bottom end45When
the crankcase is seated, install and firmly seat the crankcase taper pin46Torque main bearing screws in stages to 31-35 ftIbs(42-47