1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 152Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 152

Installation 1Apply Permatex No.2 gasket sealant to inner exhaust housing flange 2Install new base gasket on adapterCoat
mount screws to 100-105 ftIbs(136-142 Nm)Do not reverse the screws when retorquing them 6Apply OMC Gasket Sealing Compound
to the threaded portion of the powerhead to exhaust housing screwsLoosely install all fasteners 7Torque the six large screws
retaining the powerhead to the exhaust housing to 18-20 ftIbs(24-27 Nm)8Torque the five small screws to exhaust housing to
60-84 inIbs(7-9 Nm)the powerhead INotell order to achieve proper sealing and prevent gasket damage, the powerhead mounting
screws must be retorqued after engine has reached operating temperature and has been allowed to cool 9Engage the shift rod