1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 194Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 194

5Lightly apply OMC Triple-Guard grease to new a-ringInstall the a-ring in top groove of the bearing housing INote Do not
pin V4flush V6to dimension shown Driveshaft Shimming Using Tool, PIN 393185 The driveshaft pinion is precisely meshed with
the forward and reverse gears by using one or more shims between the driveshaft bearing housing and the thrust washerWhen
installing new thrust bearing or washer, bearing housing, pinion, or driveshaft, it is necessary to properly shim the assembly
to restore factory clearanceGauge bars are precision made and should be handled carefullyThe length of each bar is stamped
near the part numberThis dimension is 0.020 in(0,508 mm) shorter than the actual shimmed length of the driveshaftDR4610 INote