1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 198Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 198

10 833096 COB7581 The clutch dog is not symmetricalIf installed backward, it will not fully engage reverse gear and will
and align the forward bearing housing with the detent lever toward the topPush the detent lever down, into REVERSE positionBe
sure the thrust bearing and the thrust washer are properly positionedInsert the propeller shaft assembly into the gearcase,
being sure to align the shift housing pin with hole in forward end of gearcase housing 17Lubricate two new shift rod cover
O-rings with OMC Triple-Guard greaseInstall the O-rings into the shift rod cover 18Place the shift rod grommet and shift
rod spacer (25 in (635 mm) models) on the shift rodGrease the threaded end of the shift rod and insert it through the coverTurn
the shift rod while pushing it through the cover to avoid damaging the O-rings 19Apply OMC Gasket Sealing Compound to both