1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 201Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 201

Screw in vacuum testerPump outto 3-5 in(76-127 mm) of mercury and see if vacuum holdsThen, pump out to 15 in(381 mm) of mercury
plug, then the drainfill plugTighten them to torque of 84-86 inIbs(9-10 Nm) Check the oil level after the motor has been
run 36Adjust the shift rod as follows: Check the shift rod height from the shift rod hole to the surface of the gearcase
using OMC Universal Shift Rod Height Gauge, PIN 389997 With the shift rod in NEUTRAL and the offset facing forward, rotate
the shift rod full turns up or down as necessary for correct adjustment EXTRA LONG 21 in(539,8 0,8 mm) 26 '32 in(666,8 0,8
mm) PCE0045 37Install the water pump as described in Water Pump ServicingInstallation 1Coat the driveshaft splines with OMC