1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 205Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 205

COA3558 8Pull up on the driveshaft to remove it from the gearcaseThe driveshaft to pinion taper is locking taperIf necessary,
bearings that may have fallen into the gearcase11Push down on the shift rodThis will move the detent lever downward to clear
the inside of the gearcase when the propeller shaft assembly is pulled out 12Completely unscrew the shift rod, but do not
pull it out of the shift rod coverRemove the six cover screws, then lift off the shift rod and cover assemblyDiscard the
gasket underneath13Reach into the shift cavity with suitable tool and depress the detent leverWhile holding the detent lever
down, pull the clutch shaft and bearing housing assembly out of the gearcasethe detent lever is not held in the fu lIy depressed