1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 209Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 209

11If removed, install new forward gear bearingApply OMC Needle Bearing Assembly Grease to 25 new rollersInstall the rollers
needle makes contact with the flange on the housingThe indicator needle must be parallel with the side of the gear housing
and perpendicular to the table surfaceZero the dial indicator34 19Grip the bearing housing 1800 apart and pull up to get
reading on the indicatorTo determine thickness of shims; use the following example: 0.030 inof shims in the assembly0.020
inyour reading on the dial indicator 0.010 indifference innecessary end play 0.011 inrequired shims 32 20Remove the 0.030
inof shims from the assemblyReassemble the gear assembly using combination of shims to achieve the required thicknessApply