1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 215Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 215

Assembly INote Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable
on the tool INote Incorrect installation of the pinion bearing in the gearcase drastically reduces the life of the bearingThe
bearing is tapered so that when installed correctly, its shape compensates for stresses in the gearcase and allows full bearing
contactWhenever gearcase is disassembled, the pinion bearing should be checked to ensure that it has been installed with
the lettering facing up4Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer
on the tool contacts the spacerRemove the toolUsing rag, remove any excess grease from surface of the needle bearings 5Seat