1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 216Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 216

f31 7Lightly coat the detent ball and spring with OMC Needle Bearing Assembly GreaseFirst, insert the spring in the housing,
in on the detent lever until it snaps into NEUTRAL position Isl 9Place the cradle on the shift shaftthen rest the shifter
on the cradleSlide the shaft into the housing and insert the shifter tip into the detent's pocket13614 10Install the pivot
pin 1]1 11Thoroughly grease the original 25 needles with OMC Needle Bearing Assembly Grease and place in the bearing case13604