1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 218Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 218

r:;:;J 17Press detent lever down to engage REVERSE (lowest) positionDoing so will provide clearance to install the clutch
of gearcase slightly downwardThis will help r.J7l 21Place the shift rod grommet and spacer on the shift rodGrease the threaded
end of the shift rod and insert it through the coverTurn the shift rod while pushing it through the cover to avoid damaging
the a-rings f18l 22Apply OMC Gasket Sealing Compound to both sides of a new shift rod cover gasket Position the gasket on
the gearcaseThread the shift rod into the detent lever about four turns 23Move shift rod from side to side while pushing
on the clutch shaft to ensure proper alignment of the bearing housing locator pin into the locator pin hole in the gearcase