1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 219Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 219

25Position the driveshaft thrust bearingthrust washerand shim(s) (selected earlier) on the driveshaftin the order shown 1201
needle bearingsDegrease taper of the pinionPosition the pinion in the gearcase29Degrease the driveshaft taper and install
the driveshaft30Lightly coat the threads of the pinion nut with outboard lubricant and install on the driveshaftTurn the
driveshaft by hand to engage the nut 31Turn the gearcase right side upUsing OMC Driveshaft Socket, PIN 311875, and OMC Pinion
Nut Holder, PIN 334455, torque the pinion nut to 70-80 ftIbs(90-108 Nm)pinion lifeDo not reuse damaged pinion nuts 1Note
Overtorquing or undertorquing the pinion nut will reduce 32Position the washers on the driveshaft bearing housing screwsApply