1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 225Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 225

Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing 2Remove four bearing housing retaining screws,
from the impeller end of the driveshaft until the seal carrier is free from the housingContinue to press bearings and driveshaft
from bearing housing 8If seals are damaged, the carrier and seals are serviced as an assemblyApply OMC Triple-Guard grease
to seal lips before reinstalling the carrier and seal assembly[] 9To replace the bearing housing seal, remove inner seal
retaining ring with knife blade or thin-blade screwdriverLift tang of retaining ring, and raise retaining ring in circular