1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 233Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 233

[]] []] 9Assemble remammg shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24
1Move remote control handle to NEUTRAL detent 2Hold reverse gate up and check for proper clearance between reverse gate and
water flow passage: in(11,9 mm) 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while holding reverse
gate up, until proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle to FORWARD
detent[]] 5When the roller is in FORWARD position CD, apply hand pressure to move the reverse gate up, toward NEUTRALIf properly