1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 304Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 304

Trim Sending Unit Adjustment 1Tilt the engine and engage the mooring bracketr:jl 2Temporarily, install PIN 387278 thrust
the sending unit by pivoting it up or down6Lower the engine against the thrust rod to verify adjustmentRepeat Step 5, if
necessary7After adjustment is correct, tilt the motor up, tighten the two sending unit screws, and remove the thrust rod
t=J sending unit can be pivoted ill limiter rod must be installed and in the same location as it was when the motor was brought