1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 33Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 33

Break-In Procedure Standard Fuel TankUse 25: fueloil mixture for the first 12 gallons of fuelOptional AccuMixTankUse 50:
NOT hold constant throttle settingChange engine speed every 15 minutesWith easy planing boats, use full throttle to quickly
accelerate boat onto planeImmediately reduce throttle to one-half as soon as boat is on planeBE SURE boat remains on plane
at this throttle settingNext Nine Hours Bring boat onto plane and operate engine below throttleDO NOT EXCEED 4500 RPM Every
30 minutes, operate engine at full throttle for approximately one minute DO NOT exceed recommended maximum engine RPMRefer
to Specifications, this SectionRetorque cylinder head screws after engine break-in periodRetorque after engine has been run
and cylinder heads have cooled to the touchAfter 10 hours of break-in, check oil level in the AccuMix reservoir to verify
that oil is being consumed to ensure proper lubrication of engineAdd oil to refill AccuMix reservoir before switching from