1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 58Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 58

Heli-Coillnserts and Installers rv threadsThe installation kit consists of drill,totap, and damaged Use these Heli-Coil inserts
Heli-Coill nserts, 34 -16 Heli-Coillnserts, 14 mm (318 inReach) Heli-Coillnserts, 14 mm (V2 inReach) PCE0027 Installation
Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil tap supplied with packCheck thread
size on shank to make certain proper size is used3Screw insert onto mandrel until tang is fully engaged in driving contour4Screw
insert into tapped holeTop of insert must be onequarter to one-half turn below top surface5The tang must be removed to allow
full passage of screw into the insertThe tang may be broken off cleanly at the notch in the bottom coil with punch or rod