1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 82Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 82

Carburetor Mixture Adjustment, 9.915 1Start the engine and run it in FORWARD at one-half hrottleAllow the engine to reach
engine speed and turn the idle speed adjustment to allow the engine to run at minimum of 650 RPM in FORWARD6Run the engine
in gear near full throttle for one minuteQuickly reduce speed to SLOW (700-800 RPM) and shift into NEUTRALThe engine should
continue to run smoothly7If the engine stalls or pops, the mixture is too leanTurn the needle counterclockwise 1 16 turnAllow
15 seconds after each adjustment for the engine to respond Repeat Step to verify that the mixture adjustment is correct8If
the engine does not respond to adjustments, check it for other problemsMake sure gasoline is of good quality and mixed with