1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 117Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 117

Ignition Plate Servicing9.915 Removal 1To avoid accidental starting of engine while servicing, twist and remove all spark
four support plate screws Install the screws and tighten them to torque of 48-60 inIbs(5-7 Nm) 2Apply OMC Moly Lube to the
crankcase boss 3Lubricate the ignition plate bearing groove with OMC Moly Lube (]] 4Apply OMC Nut Lock to the threads of
the ignition plate screwsInsert needle-nose pliers into slots in the ignition plate bearing and compress bearing while guiding
the ignition plate into position5Align the ignition plate with the retainer plateTighten the screws to torque of 25-35 inIbs(2,8-4,0