1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 123Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 123

IGNITION OUTPUT TESTSCD II ill plugs installed and torqued in the cylinder headIf necesI.A All cranking output tests must
spark tester to '" To avoid possible shock hazard, do not handle ignition coils or spark tester during cranking tests3If
equipped, install the emergency stop switch clip and lanyard assemblyCrank the engineSpark should jump each tester gap alternately
If tester shows good output on both cylinders, go to STEPRUNNING OUTPUT TEST Iftester shows good output on one cylinder,
go to STEPPOWER PACK OUTPUT TEST If tester shows no output, go to STEPSTOP CIRCUIT TESTIt is possible for the ignition system
to have problem but still produce good outputIf the engine "pops" or "backfires" during starting, the ignition may be out