1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 125Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 125

Ohmmeter TestStop Button Note All ohmmeter tests must be performed with the engine NOT running1Most steering handles contain
clip and lanyard1sl 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between ignition plate end of EI connector,
terminal liE", and clean engine ground The meter must show high reading4Momentarily, press inward on the stop button The
meter must show low reading 5Remove the clip and lanyard The meter must show low reading To avoid sudden loss of control,