1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 129Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 129

11 STEPSENSOR COIL TEST Ground Test [!!] 1Disconnect 5-pin Amphenol connector between ignition plate and power pack2Set peak-reading
repair ground, or replace sensor coil4If no reading is indicated in Step 3, go to Output TestOutput Test 1Set peak-reading
voltmeter to: 9.915"NEG" and "50", or "SEN" and "50" on Stevens CD-77 meter 20 thru 30"POS" and "50", or "SEN" and "50" on
Stevens CD-77 meter 11212Attach voltmeter black lead to ignition plate connector, terminal "C"Attach meter red lead to terminal