1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 146Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 146

101 8Using tool as drawn on Page 4-9, or equivalent, push crankcase taper pin toward intake manifold surfaceDo not use any
at reassemblyUsing an indelible ink marker, mark each component when they are removed to ensure correct mating, and keep
the needles of each cylinder togetherLoosely install the cylinder head to prevent the pistons from falling out when the crankshaft
is removed r:t2l 12Use 53 inAllen wrench to remove connecting rod screwsRemove rod caps and bearing retainers r:t3l 13Lift
the crankshaft out of the cylinder blockReplace the connecting rod caps on the rodsOrient them exactly as they were before
you removed themInstall the screws finger tight14Disassemble the crankshaft as follows: Remove the flywheel key using diagonal-cutting