1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 147Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 147

Remove the retaining ring from groove of the center main bearingSeparate the bearing and remove the 23 loose needle bearings
the piston rings using an appropriate ring expanderDO NOT try to save the ringsInstall complete set of new rings on every
powerhead service jobf161 17Using tool as drawn on Page 4-8, or OMCRetaining Ring Pliers, PIN 325937, remove the wrist pin
retaining ringsDiscard the ringsr:r7l 18The fit between the wrist pin to bosses of the piston is loose on both sidesPush
the wrist pin through to free the piston from the connecting rodIf necessary, use OMC Piston Cradle, PIN 326573, and OMC
Wrist Pin Pressing Pin, PIN 392511With the piston skirt flush with the cradle, press out the wrist pin using an arbor pressBe
careful not to lose any of the 22 needle bearings or the two wrist pin washersIf any of the bearings are worn or lost, replace