1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 152Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 152

6Install piston rings on each pistonTapered ring must be installed in top grooveSpread each ring with ring expander just
of the cylinder blockLoosely install the cylinder head to prevent the pistons from falling outf101 10If remoyed, oil and
press new lower main bearing onto the crankshaftWhen pressing on the bearing, support the crankshaft between the two lower
counterweights and press against the lettered side ofthe bearingInstall the retaining ring in groove of the crankshaft with
sharp edge of the ring facing away from bearing 11Oil the upper main bearing surface of the crankshaftSlide the upper main
bearing onto the crankshaft with lettered side facing the flywheel end of the crankshaft f121 12Install the center main bearingApply
OMC Needle Bearing Assembly Grease to the 23 needle bearingsPlace the bearings around the center main journal of the crankshaftPlace