1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 154Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 154

19Thoroughly clean and degrease the crankcase mating flange of the cylinder block with OMC Cleaning Solvent and let air dry20Apply
lightly tap bottom of the crankshaft to seat the lower main bearing COA6229 26Apply OMC Gasket Sealing Compound to metal
case of new upper main bearing sealInstall seal using OMC Seal Installer PIN 391060 with lip of seal facing in 12311241 27Apply
OMC Gasket Sealing Compound to metal cases of two new crankcase head sealsPlace the small diameter seal on OMC Crankcase
Head Seal Installer, PIN 330251 or 433391, with lip ofthe seal facing large diameter ofthe toolInstall the seal until tool
contacts the headUse the opposite side of the tool to install the large diameter seal Lip of this seal must face away from
large diameter of the toolWhen installed, both seal lips will face toward each otherApply approximately cc of OMC Moly Lube