1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 155Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 155

29Tighten the six main bearing screws in stages to final torque of 144-168 inIbs(16-19 Nm)Begin with the center screws and
cover and O-ringTorque screws to 60-84 inIbs(7-9 Nm)2sl 35Apply OMC Gasket Sealing Compound to both sides of two new exhaust
cover gasketsInstall the inner and outer exhaust coversTighten the screws to torque of 95-130 in Ibs(11-14 Nm), starting
with the center screws36Apply OMC Gasket Sealing Compound to both sides of new bypass cover gasketInstall the bypass coverInstall
and tighten the screws to torque of 60-84 inIbs(7-9 Nm), starting with the center screws37Install the intake manifold and
leaf valve assembly using new gasketsDo not use sealer on these gasketsTighten the screws to torque of 60-84 inIbs(7-9 Nm)38Install
the carburetion, ignition, and electrical components to the powerhead To prevent possible fire and explosion under the engine